Product Categories
- Apparatus
- Chemicals
-
Equipment
- Autoclaves
- Balances
- Centrifuges
- Colony Counters
- Dispersers
- Dry Block Heaters
- Environmental Chambers
- Filtration
- Freezers
- Fume Cupboards
- Furnaces
- Grinders & Mills
- Specials
- Second Hand
Product Description
Additional Information
Technical Information
Filtech Grade 333 offers fine particle retention with high filtration speed and good loading capacity. Widely used in general laboratory filtration including atmospheric and water pollution and monitoring such as intake controls, ozone-level, and water effluents.
Grade 333 is also well suited for filtration of water and protein, testing of algae, bacteria cultures and for radioimmunoassay with weak beta emitters.
This grade is also recommended for filtering solvents in a high-resolution laboratory.
Product Data
Grade: | 333 |
Basis Weight: | 56 g/m² |
Thickness: | 0.28 mm |
Flow Rate: | 130 ml/min |
Filtration Speed - Hertzberg: | 53 sec/100ml |
Wet Burst Strength: | 200 mm H2O |
Retention: | 1.20 µm |
Loading Capacity: | Very High |
NOTE: Specifications given are typical values that fall within a defined range. For this reason observed values may vary slightly.
Product Group | No |
---|---|
Technical Information | Product Data Grade: 333 Basis Weight: 56 g/m² Thickness: 0.28 mm Flow Rate: 130 ml/min Filtration Speed - Hertzberg: 53 sec/100ml Wet Burst Strength: 200 mm H2O Retention: 1.20 µm Loading Capacity: Very High NOTE: Specifications given are typical values that fall within a defined range. For this reason observed values may vary slightly. |
Pack size | N/A |
Product Data
Grade: 333
Basis Weight: 56 g/m²
Thickness: 0.28 mm
Flow Rate: 130 ml/min
Filtration Speed - Hertzberg: 53 sec/100ml
Wet Burst Strength: 200 mm H2O
Retention: 1.20 µm
Loading Capacity: Very High
NOTE: Specifications given are typical values that fall within a defined range. For this reason observed values may vary slightly.