Product Categories
- Apparatus
- Chemicals
-
Equipment
- Autoclaves
- Balances
- Centrifuges
- Colony Counters
- Dispersers
- Dry Block Heaters
- Environmental Chambers
- Filtration
- Freezers
- Fume Cupboards
- Furnaces
- Grinders & Mills
- Specials
- Second Hand
Product Description
Additional Information
Technical Information
Filtech Grade 423 offers better filtration speed and a higher loading capacity than an analytical filter paper of similar particle retention.
Grade 423 is particularly recommended for pre-filtration of membrane filters and is also used in combination with Filtech Grade 363 as a highly efficient protective and retentive grade density pre-filter for membrane filters.
Product Data
| Grade: | 423 |
| Basis Weight: | 123 g/m² |
| Thickness: | 0.66 mm |
| Flow Rate: | 350 ml/min |
| Filtration Speed - Hertzberg: | 19 sec/100ml |
| Wet Burst Strength: | 230 mm H2O |
| Retention: | 3.10 µm |
| Loading Capacity: | Very High |
NOTE: Specifications given are typical values that fall within a defined range. For this reason observed values may vary slightly.
| Product Group | No |
|---|---|
| Technical Information | Product Data Grade: 423 Basis Weight: 123 g/m² Thickness: 0.66 mm Flow Rate: 350 ml/min Filtration Speed - Hertzberg: 19 sec/100ml Wet Burst Strength: 230 mm H2O Retention: 3.10 µm Loading Capacity: Very High NOTE: Specifications given are typical values that fall within a defined range. For this reason observed values may vary slightly. |
| Pack size | N/A |
Product Data
Grade: 423
Basis Weight: 123 g/m²
Thickness: 0.66 mm
Flow Rate: 350 ml/min
Filtration Speed - Hertzberg: 19 sec/100ml
Wet Burst Strength: 230 mm H2O
Retention: 3.10 µm
Loading Capacity: Very High
NOTE: Specifications given are typical values that fall within a defined range. For this reason observed values may vary slightly.