Product Categories
- Apparatus
- Chemicals
-
Equipment
- Autoclaves
- Balances
- Centrifuges
- Colony Counters
- Dispersers
- Dry Block Heaters
- Environmental Chambers
- Filtration
- Freezers
- Fume Cupboards
- Furnaces
- Grinders & Mills
- Specials
- Second Hand
Filtech Grade 453 is a high performance grade, designed to retain extremely fine particles down to 0.7um. Grade 453 has retention comparable to a membrane filter while providing higher flow and loading capacity. It is recommended for filtering fine precipitated proteins.
In the filtration of nucleic acids and difficult biochemical solutions, Grade 453 is used in combination with Filtech Grade 423 as a highly efficient protective and retentive pre-filter to extend the loading capacity of membrane filters.
Grade 453 is recommended for use in TCLP procedure as described in test methods for evaluating solid wastes, EPA method 1311.
Product Data
Grade: | 453 |
Basis Weight: | 88 g/m² |
Thickness: | 0.44 mm |
Flow Rate: | 25 ml/min |
Filtration Speed - Hertzberg: | 274 sec/100ml |
Wet Burst Strength: | 380 mm H2O |
Retention: | 0.70 µm |
Loading Capacity: | Very High |
NOTE: Specifications given are typical values that fall within a defined range. For this reason observed values may vary slightly.
Product Group | No |
---|---|
Technical Information | Product Data Grade: 453 Basis Weight: 88 g/m² Thickness: 0.44 mm Flow Rate: 25 ml/min Filtration Speed - Hertzberg: 274 sec/100ml Wet Burst Strength: 380 mm H2O Retention: 0.70 µm Loading Capacity: Very High NOTE: Specifications given are typical values that fall within a defined range. For this reason observed values may vary slightly. |
Pack size | N/A |