Product Categories
- Apparatus
- Chemicals
-
Equipment
- Autoclaves
- Balances
- Centrifuges
- Colony Counters
- Dispersers
- Dry Block Heaters
- Environmental Chambers
- Filtration
- Freezers
- Fume Cupboards
- Furnaces
- Grinders & Mills
- Specials
- Second Hand
TPS has used the latest microprocessor electronics to totally eliminate all internal and external adjustments. The result is a dramatic increase in reliability. The unit is ideal for field or factory use.
The two-line, 24 character display shows the Dissolved Oxygen plus pH readings simultaneously. Alternatively, a Large Digit mode is available. This shows one reading at a time at almost double the size. To simply use of the Aqua-DP, plain English prompts and error messages are provided. There are no codes to interpret like some other brands.
Calibration of the Aqua-DP could not be simpler.
Just place the sensor into the relevant standard and press the Calibrate key. That's all there is to it !
The Aqua-DP displays sensor condition after calibration has been completed, allowing for preventative maintenance.
All calibration information is stored in memory when the Aqua-DP is switched off, even if the battery is removed.
Salinity correction for ppM Dissolved Oxygen readings is a breeze. Simply enter the Salinity value and the Aqua-DP does the rest !
The Aqua-DP will provide in excess of 70 hours of continuous use with an alkaline 9 volt battery.
A handy battery-saver function switches the Aqua-DP off after 5 minutes if no keys have been pressed. This function can also be disabled for continuous operation.
Correct temperature compensation is vital for accurate Dissolved Oxygen measurements. The Aqua-DP compensates for membrane permeability for all readings and also for Dissolved Oxygen solubility in ppM mode.
Temperature compensation for pH probe performance is also fully automatic.
The Aqua Series is proudly designed and manufactured in Australia. Our aim is to provide you with the best quality, service and value for money. The TPS Quality System has been certified in accordance with the AS/NZS ISO 9001 standard. Since 1968, TPS has built a reputation for excellent backup service that is second to none.
Product Group | No |
---|---|
Technical Information | ppM (mg/L) Range : 0 to 25.0 ppM Resolution : 0.1 ppM Accuracy : +/-0.1 ppM
% Saturation Range : 0 to 250.0 %Sat'n Resolution : 0.1 %Sat'n Accuracy : +/-0.3 %Sat'n
pH Range : 0 to 14.00 pH Resolution : 0.01 pH Accuracy : +/-0.01pH
mV Range : 0 to +/-999mV Resolution : 1mV Accuracy : +/-1mV
Temperature Range : -10.0 to 120.0 OC (sensor limit 50 OC) Resolution : 0.1 OC Accuracy : +/-0.2 OC
Salinity Correction User-set, from 0 to 50.0 ppK NaCl
Oxygen Calibration Automatic one-touch calibration in Zero solution and in Air
pH Calibration Automatic one-touch calibration in 4.00, 6.88, 7.00, 9.23 or 10.06 pH buffers.
Temperature Calibration Automatic calibration against reference thermometer
Temp Sensor Offset Range -10.0 to +10.0 OC
Temperature Compensation Oxygen Dual automatic system for : 1. Membrane permeability 2. Solubility compensation in ppM mode
pH Automatic, 0 to 100 OC.
Enclosure Tough, ABS plastic case, waterproof to IP65
Display 24 Character alphanumeric LCD with full-text prompts and error messages.
Battery Saver Function On : Automatically switches off after 5 minutes of no use. Off : Unit remains on for continuous use.
Power 9V Alkaline battery for 100+ hours.
Dimensions 157 x 78 x 35 mm
Mass Instrument only : Approx 250g Full Kit : Approx 1.5kg
Environment Temperature : 0 to 45 OC Humidity : 0 to 90% R.H. |
Pack size | EACH |
ppM (mg/L)
Range : 0 to 25.0 ppM
Resolution : 0.1 ppM
Accuracy : +/-0.1 ppM
% Saturation
Range : 0 to 250.0 %Sat'n
Resolution : 0.1 %Sat'n
Accuracy : +/-0.3 %Sat'n
pH
Range : 0 to 14.00 pH
Resolution : 0.01 pH
Accuracy : +/-0.01pH
mV
Range : 0 to +/-999mV
Resolution : 1mV
Accuracy : +/-1mV
Temperature Range : -10.0 to 120.0 OC (sensor limit 50 OC)
Resolution : 0.1 OC
Accuracy : +/-0.2 OC
Salinity Correction User-set, from 0 to 50.0 ppK NaCl
Oxygen Calibration
Automatic one-touch calibration in Zero solution and in Air
pH Calibration
Automatic one-touch calibration in 4.00, 6.88, 7.00, 9.23 or 10.06 pH buffers.
Temperature Calibration
Automatic calibration against reference thermometer
Temp Sensor Offset Range
-10.0 to +10.0 OC
Temperature Compensation
Oxygen
Dual automatic system for :
1. Membrane permeability
2. Solubility compensation in ppM mode
pH
Automatic, 0 to 100 OC.
Enclosure
Tough, ABS plastic case, waterproof to IP65
Display
24 Character alphanumeric LCD with full-text prompts and error messages.
Battery Saver Function
On : Automatically switches off after 5 minutes of no use.
Off : Unit remains on for continuous use.
Power 9V Alkaline battery for 100+ hours.
Dimensions 157 x 78 x 35 mm
Mass
Instrument only : Approx 250g
Full Kit : Approx 1.5kg
Environment Temperature : 0 to 45 OC
Humidity : 0 to 90% R.H.