Product Categories
- Apparatus
- Chemicals
-
Equipment
- Autoclaves
- Balances
- Centrifuges
- Colony Counters
- Dispersers
- Dry Block Heaters
- Environmental Chambers
- Filtration
- Freezers
- Fume Cupboards
- Furnaces
- Grinders & Mills
- Specials
- Second Hand
Product Description
Additional Information
Technical Information
The Aqua-DP is a waterproof, easy-to-use, Dissolved Oxygen, pH/mV and Temperature meter. It provides accurate, reliable measurements, and is very easy to use.
Genuine one-touch calibration puts an end to time-consuming calibration procedures.
Rugged and Reliable
TPS has used the latest microprocessor electronics to totally eliminate all internal and external adjustments. The result is a dramatic increase in reliability. The unit is ideal for field or factory use.
The Dissolved Oxygen and pH sensors are designed for maximum durability in field and factory environments.
24 Character Alphanumeric Display
The two-line, 24 character display shows the Dissolved Oxygen plus pH readings simultaneously. Alternatively, a Large Digit mode is available. This shows one reading at a time at almost double the size. To simply use of the Aqua-DP, plain English prompts and error messages are provided. There are no codes to interpret like some other brands.
One-touch Calibration
Calibration of the Aqua-DP could not be simpler.
Just place the sensor into the relevant standard and press the Calibrate key. That's all there is to it !
The Aqua-DP displays sensor condition after calibration has been completed, allowing for preventative maintenance.
All calibration information is stored in memory when the Aqua-DP is switched off, even if the battery is removed.
Salinity Correction
Salinity correction for ppM Dissolved Oxygen readings is a breeze. Simply enter the Salinity value and the Aqua-DP does the rest !
Low Battery Drain
The Aqua-DP will provide in excess of 70 hours of continuous use with an alkaline 9 volt battery.
A handy battery-saver function switches the Aqua-DP off after 5 minutes if no keys have been pressed. This function can also be disabled for continuous operation.
Temperature Compensation
Correct temperature compensation is vital for accurate Dissolved Oxygen measurements. The Aqua-DP compensates for membrane permeability for all readings and also for Dissolved Oxygen solubility in ppM mode.
Temperature compensation for pH probe performance is also fully automatic.
Australian Quality
The Aqua Series is proudly designed and manufactured in Australia. Our aim is to provide you with the best quality, service and value for money. The TPS Quality System has been certified in accordance with the AS/NZS ISO 9001 standard. Since 1968, TPS has built a reputation for excellent backup service that is second to none
NOTE 1m KIT INCLUDES
pH Sensor, 1m Surface only....121207
YSI DO2 Sensor -(no cable)...123204
1m cable for Sensor (YSI).....123212
Membrane & filling sol'n kit..123301
pH7.00 Buffer, 200mL..........121387
pH4.00 Buffer, 200mL..........121381
9V Alkaline Battery ..........130026
Manual........................130050
Genuine one-touch calibration puts an end to time-consuming calibration procedures.
Rugged and Reliable
TPS has used the latest microprocessor electronics to totally eliminate all internal and external adjustments. The result is a dramatic increase in reliability. The unit is ideal for field or factory use.
The Dissolved Oxygen and pH sensors are designed for maximum durability in field and factory environments.
24 Character Alphanumeric Display
The two-line, 24 character display shows the Dissolved Oxygen plus pH readings simultaneously. Alternatively, a Large Digit mode is available. This shows one reading at a time at almost double the size. To simply use of the Aqua-DP, plain English prompts and error messages are provided. There are no codes to interpret like some other brands.
One-touch Calibration
Calibration of the Aqua-DP could not be simpler.
Just place the sensor into the relevant standard and press the Calibrate key. That's all there is to it !
The Aqua-DP displays sensor condition after calibration has been completed, allowing for preventative maintenance.
All calibration information is stored in memory when the Aqua-DP is switched off, even if the battery is removed.
Salinity Correction
Salinity correction for ppM Dissolved Oxygen readings is a breeze. Simply enter the Salinity value and the Aqua-DP does the rest !
Low Battery Drain
The Aqua-DP will provide in excess of 70 hours of continuous use with an alkaline 9 volt battery.
A handy battery-saver function switches the Aqua-DP off after 5 minutes if no keys have been pressed. This function can also be disabled for continuous operation.
Temperature Compensation
Correct temperature compensation is vital for accurate Dissolved Oxygen measurements. The Aqua-DP compensates for membrane permeability for all readings and also for Dissolved Oxygen solubility in ppM mode.
Temperature compensation for pH probe performance is also fully automatic.
Australian Quality
The Aqua Series is proudly designed and manufactured in Australia. Our aim is to provide you with the best quality, service and value for money. The TPS Quality System has been certified in accordance with the AS/NZS ISO 9001 standard. Since 1968, TPS has built a reputation for excellent backup service that is second to none
NOTE 1m KIT INCLUDES
pH Sensor, 1m Surface only....121207
YSI DO2 Sensor -(no cable)...123204
1m cable for Sensor (YSI).....123212
Membrane & filling sol'n kit..123301
pH7.00 Buffer, 200mL..........121387
pH4.00 Buffer, 200mL..........121381
9V Alkaline Battery ..........130026
Manual........................130050
Product Group | No |
---|---|
Technical Information | Specifications ppM (mg/L) Range : 0 to 25.0 ppM Resolution : 0.1 ppM Accuracy : +/-0.1 ppM % Saturation Range : 0 to 250.0 %Sat'n Resolution : 0.1 %Sat'n Accuracy : +/-0.3 %Sat'n pH Range : 0 to 14.00 pH Resolution : 0.01 pH Accuracy : +/-0.01pH mV Range : 0 to +/-999mV Resolution : 1mV Accuracy : +/-1mV Temperature Range : -10.0 to 120.0 OC (sensor limit 50 OC) Resolution : 0.1 OC Accuracy : +/-0.2 OC Salinity Correction User-set, from 0 to 50.0 ppK NaCl Oxygen Calibration Automatic one-touch calibration in Zero solution and in Air pH Calibration Automatic one-touch calibration in 4.00, 6.88, 7.00, 9.23 or 10.06 pH buffers. Temperature Calibration Automatic calibration against reference thermometer Temp Sensor Offset Range -10.0 to +10.0 oC Temperature Compensation Oxygen Dual automatic system for : 1. Membrane permeability 2. Solubility compensation in ppM mode pH Automatic, 0 to 100 OC. Enclosure Tough, ABS plastic case, waterproof to IP65 Display 24 Character alphanumeric LCD with full-text prompts and error messages. Battery Saver Function On : Automatically switches off after 5 minutes of no use. Off : Unit remains on for continuous use. Power 9V Alkaline battery for 100+ hours. Dimensions 157 x 78 x 35 mm Mass Instrument only : Approx 250g Full Kit : Approx 1.5kg Environment Temperature : 0 to 45 OC Humidity : 0 to 90% R.H. 123152/1 AQUADP |
Pack size | KIT |
Specifications
ppM (mg/L)
Range : 0 to 25.0 ppM
Resolution : 0.1 ppM
Accuracy : +/-0.1 ppM
% Saturation
Range : 0 to 250.0 %Sat'n
Resolution : 0.1 %Sat'n
Accuracy : +/-0.3 %Sat'n
pH
Range : 0 to 14.00 pH
Resolution : 0.01 pH
Accuracy : +/-0.01pH
mV
Range : 0 to +/-999mV
Resolution : 1mV
Accuracy : +/-1mV
Temperature
Range : -10.0 to 120.0 OC
(sensor limit 50 OC)
Resolution : 0.1 OC
Accuracy : +/-0.2 OC
Salinity Correction
User-set, from 0 to 50.0 ppK NaCl
Oxygen Calibration
Automatic one-touch calibration in Zero solution and in Air
pH Calibration
Automatic one-touch calibration in 4.00, 6.88, 7.00, 9.23 or 10.06 pH buffers.
Temperature Calibration
Automatic calibration against reference thermometer
Temp Sensor Offset Range
-10.0 to +10.0 oC
Temperature Compensation
Oxygen
Dual automatic system for :
1. Membrane permeability
2. Solubility compensation in
ppM mode
pH
Automatic, 0 to 100 OC.
Enclosure
Tough, ABS plastic case, waterproof to IP65
Display
24 Character alphanumeric LCD with full-text prompts and error messages.
Battery Saver Function
On : Automatically switches
off after 5 minutes of
no use.
Off : Unit remains on for
continuous use.
Power
9V Alkaline battery for 100+ hours.
Dimensions
157 x 78 x 35 mm
Mass
Instrument only : Approx 250g
Full Kit : Approx 1.5kg
Environment
Temperature : 0 to 45 OC
Humidity : 0 to 90% R.H.
123152/1
AQUADP
ppM (mg/L)
Range : 0 to 25.0 ppM
Resolution : 0.1 ppM
Accuracy : +/-0.1 ppM
% Saturation
Range : 0 to 250.0 %Sat'n
Resolution : 0.1 %Sat'n
Accuracy : +/-0.3 %Sat'n
pH
Range : 0 to 14.00 pH
Resolution : 0.01 pH
Accuracy : +/-0.01pH
mV
Range : 0 to +/-999mV
Resolution : 1mV
Accuracy : +/-1mV
Temperature
Range : -10.0 to 120.0 OC
(sensor limit 50 OC)
Resolution : 0.1 OC
Accuracy : +/-0.2 OC
Salinity Correction
User-set, from 0 to 50.0 ppK NaCl
Oxygen Calibration
Automatic one-touch calibration in Zero solution and in Air
pH Calibration
Automatic one-touch calibration in 4.00, 6.88, 7.00, 9.23 or 10.06 pH buffers.
Temperature Calibration
Automatic calibration against reference thermometer
Temp Sensor Offset Range
-10.0 to +10.0 oC
Temperature Compensation
Oxygen
Dual automatic system for :
1. Membrane permeability
2. Solubility compensation in
ppM mode
pH
Automatic, 0 to 100 OC.
Enclosure
Tough, ABS plastic case, waterproof to IP65
Display
24 Character alphanumeric LCD with full-text prompts and error messages.
Battery Saver Function
On : Automatically switches
off after 5 minutes of
no use.
Off : Unit remains on for
continuous use.
Power
9V Alkaline battery for 100+ hours.
Dimensions
157 x 78 x 35 mm
Mass
Instrument only : Approx 250g
Full Kit : Approx 1.5kg
Environment
Temperature : 0 to 45 OC
Humidity : 0 to 90% R.H.
123152/1
AQUADP