Product Categories
- Apparatus
- Chemicals
-
Equipment
- Autoclaves
- Balances
- Centrifuges
- Colony Counters
- Dispersers
- Dry Block Heaters
- Environmental Chambers
- Filtration
- Freezers
- Fume Cupboards
- Furnaces
- Grinders & Mills
- Specials
- Second Hand
A fume cupboard is a partially enclosed work place that is designed to contain and prevent the spread of fumes to operators and other personnel. It is mechanically ventilated by means of exhausting air through the working aperture and the exhaust system provides for the safe and remote discharge of diluted fumes outside the building.
| Product Group | No |
|---|---|
| Technical Information | Fume Cupboard single sided – S2M - 1500 wide x 750 depth x 1600 (mm) high and includes the following: - Fully welded PVC body (white) - Tiled work surface - Fluorescent light to illuminate to 400 lux One (1) V4 ‘Fail-safe’ Control Panel complete with the following: - One minute pre-purge function - Twenty minute post purge function - Emergency Isolation - One (1) Variable speed drive 1.5 kw - One (1) 10 amp GPO - PVC plenum for housing of control fascia - Airflow pressure switch - Labelling as per AS/NZS 2243.8 2006 - 6mm Toughened glass sash - One (1) 150mm dia P/P pot sink - One (1) Swan neck cold water outlet complete with a remote control valve. One (1) New FT300 Series Chemical Exhaust fan and includes the following: - Fabricated PVC fan case - Polypropylene forward curve fan rotor - Three phase 1.5kw motor - Two (2) flexible connections - Four (4) Anti vibration mounts - Isolation switch - Galvanized fan stand and stack support (roof mounted) - One (1) Velocity cone - Six (6) Meters of 300 PVC pipe - 90 Deg elbows Fume Cupboard under bench - 32 x 32 RHS powder coated - PVC (white) cladding - Two (2) PVC sliding doors Commissioning of Fume Cupboard to AS/NZS 2243.8:2006 by S2M.N.B. Not included in package: - Painting and patching - On site electrical connection of new fume cupboard control system and exhaust fan (Fume cupboard is pre wired) - On site plumbing and waste (Fume cupboard is pre plumbed) - Scaffold for roof access
Please note: The fume cupboard does not have its own supply air system, that is normally installed by an air conditioning company. The makeup air must NOT be directed to the face of the fume cupboard. |
| Pack size | EACH |
Fume Cupboard single sided – S2M - 1500 wide x 750 depth x 1600 (mm) high and includes the following:
- Fully welded PVC body (white)
- Tiled work surface
- Fluorescent light to illuminate to 400 lux
One (1) V4 ‘Fail-safe’ Control Panel complete with the following:
- One minute pre-purge function
- Twenty minute post purge function
- Emergency Isolation
- One (1) Variable speed drive 1.5 kw
- One (1) 10 amp GPO
- PVC plenum for housing of control fascia
- Airflow pressure switch
- Labelling as per AS/NZS 2243.8 2006
- 6mm Toughened glass sash
- One (1) 150mm dia P/P pot sink
- One (1) Swan neck cold water outlet complete with a remote control valve.
One (1) New FT300 Series Chemical Exhaust fan and includes the following:
- Fabricated PVC fan case
- Polypropylene forward curve fan rotor
- Three phase 1.5kw motor
- Two (2) flexible connections
- Four (4) Anti vibration mounts
- Isolation switch
- Galvanized fan stand and stack support (roof mounted)
- One (1) Velocity cone
- Six (6) Meters of 300 PVC pipe
- 90 Deg elbows
Fume Cupboard under bench
- 32 x 32 RHS powder coated
- PVC (white) cladding
- Two (2) PVC sliding doors
Commissioning of Fume Cupboard to AS/NZS 2243.8:2006 by S2M.
N.B. Not included in package:
- Painting and patching
- On site electrical connection of new fume cupboard control system and exhaust fan (Fume cupboard is pre wired)
- On site plumbing and waste (Fume cupboard is pre plumbed)
- Scaffold for roof access
Please note: The fume cupboard does not have its own supply air system, that is normally installed by an air conditioning company. The makeup air must NOT be directed to the face of the fume cupboard.