Product Categories
- Apparatus
- Chemicals
-
Equipment
- Autoclaves
- Balances
- Centrifuges
- Colony Counters
- Dispersers
- Dry Block Heaters
- Environmental Chambers
- Filtration
- Freezers
- Fume Cupboards
- Furnaces
- Grinders & Mills
- Specials
- Second Hand
Product Description
Additional Information
Technical Information
- Examination gloves
- Ambidextrous
- Comfortable beaded cuff
- Latex free
- Excellent puncture resistance and strength
- Superior barrier protection over latex and vinyl
- Nitrile gloves are fully Micro Textured for excellent wet & dry grip
- Nitrile Soft and Ultrasoft a softer and thinner formulation for improved feel and sensitivity, with micro textured fingers for excellent wet & dry grip
- Nitrile Long Cuff provides greater arm protection
- Nitrile Black gloves do not show stains from inks and dyes
- HACCP certified
- Technical data sheets available
Note: Order by boxes or cartons. 10 boxes = 1 carton.
| Product Group | No |
|---|---|
| Technical Information | Dimensions td>Min. 240 td>Min. 240 td>Min. 240 td>Min. 240 td>Min. 240 Size Palm Width (mm) MGM Length (mm) ASTM D3578-05 Length (mm) S 83-88 Min. 230 M 93-98 Min. 230 L 103-108 Min. 230 XL 113-118 Min. 230 XXL 118-123 Min. 230 Thickness Location of Thickness Measurement Single Wall (mm) Finger Min. 0.15 Palm Min. 0.15 Cuff Min. 0.09 Physical Properties td>Min. 400 td> - td>Min 6 Before Aging After Aging Tensile Strength (MPa) Min. 14/td> td>Min. 14 Elongation (%) Min. 500 Modulus (500%) Max. 5.5 MPa Force At Break (N) Min 9 Test Results td>1.5 td>4.0 td>4.0 td>4.0 Inspection Level AQL Watertight Test G1 Major Defects G1 Dimensions S2 Physical Properties S2 |
| Pack size | No |
Dimensions
td>Min. 240 td>Min. 240 td>Min. 240 td>Min. 240 td>Min. 240
Size Palm Width (mm) MGM Length (mm) ASTM D3578-05 Length (mm)
S 83-88 Min. 230
M 93-98 Min. 230
L 103-108 Min. 230
XL 113-118 Min. 230
XXL 118-123 Min. 230
Thickness
Location of Thickness Measurement Single Wall (mm)
Finger Min. 0.15
Palm Min. 0.15
Cuff Min. 0.09
Physical Properties
td>Min. 400 td> - td>Min 6
Before Aging After Aging
Tensile Strength (MPa) Min. 14/td> td>Min. 14
Elongation (%) Min. 500
Modulus (500%) Max. 5.5 MPa
Force At Break (N) Min 9
Test Results
td>1.5 td>4.0 td>4.0 td>4.0
Inspection Level AQL
Watertight Test G1
Major Defects G1
Dimensions S2
Physical Properties S2