Product Categories
- Apparatus
- Chemicals
-
Equipment
- Autoclaves
- Balances
- Centrifuges
- Colony Counters
- Dispersers
- Dry Block Heaters
- Environmental Chambers
- Filtration
- Freezers
- Fume Cupboards
- Furnaces
- Grinders & Mills
- Specials
- Second Hand
Product Description
Additional Information
Technical Information
- The world’s first patented Tube Mill control is a batch mill with disposable grinding chamber. Eliminates possibility of cross-contamination and the effort of cleaning. The grinding chamber and cover are made of a transparent material so grinding tests can be observed at any time. The mill can be used for hard (Mohs hardness up to 5), dry and brittle materials. It is especially suitable for grinding seeds, such as corn and wheat. During development of the mill, particular emphasis was placed on security. The mill will only start when the hood is closed. When the grinding chamber is not inserted properly or not closed properly, the drive unit will display an error message and the drive will not start. During operation, the grinding chamber cannot be opened. The drive and the grinding chambers are secured with a labyrinth seal. No dust can escape from the chamber or penetrate the drive.
- • Clearly arranged, multilingual OLED-display
- • Timer, adjustable from 5 s to 3 min
- • USB interface for control and documentation of all the parameters
- • Interval operation available
- • Infinitely variable speed from 5000 to 25000 rpm
- • Various operating modes
- • Adjustable safety speed
- • Adjustable safety time
- • Programmable and storable test conditions
- • Error Code Display
- • Reproducible test results
- • Easy operation with touch keypad
- • Dust proof sealed housing
- • Quiet operation
| Product Group | Tube Mill |
|---|---|
| Technical Information |
|
| Pack size | EACH |
- Process type batch
- Operating principle cutting/impact
- Motor rating input 100 W
- Motor rating output 80 W
- Speed range 5000 - 25000 rpm
- Speed deviation 500 ±rpm
- Circumferential speed max. 65 m/s
- Usable volume max. 40 ml
- Feed hardness max. 5 Mohs
- Feed grain size max. 10 mm
- Material beater/cutter stainless steel 1.4034
- Power-on time ON 3 min
- Milling chamber, can be cooled with water no
- Mill feed can be cooled in milling chamber with dry ice yes
- Mill feed can be cooled in milling chamber with liquid nitrogen no
- Dimensions (W x H x D) 180 x 170 x 300 mm
- Weight 2.7 kg
- Permissible ambient temperature 5 - 40 °C
- Permissible relative humidity 80 %
- Protection class according to DIN EN 60529 IP 30
- USB interface yes
- RS 232 interface no
- Analog output no
- Voltage 220 - 240 / 100 - 120 V
- Frequency 50/60 Hz
- Power input 100 W