Product Categories
- Apparatus
- Chemicals
-
Equipment
- Autoclaves
- Balances
- Centrifuges
- Colony Counters
- Dispersers
- Dry Block Heaters
- Environmental Chambers
- Filtration
- Freezers
- Fume Cupboards
- Furnaces
- Grinders & Mills
- Specials
- Second Hand
Product Description
Additional Information
Technical Information
The Aqua-pH is an economical waterproof pH meter with pH, mV and Temperature readouts. It provides accurate, reliable measurements, and is very easy to use.
Genuine one-touch calibration puts an
end to time-consuming calibration procedures.
The Aqua-pH comes with all the accessories needed for immediate use. A hard carry case is also available.
Rugged and Reliable
TPS has used the latest microprocessor electronics to totally eliminate all internal and external adjustments. The result is a dramatic increase in reliability. The unit is ideal for field or factory use.
24 Character Alphanumeric Display
The two-line, 24 character display shows the pH or mV reading plus temperature simultaneously. Alternatively, a Large Digit mode is available. This shows one reading at a time at almost double the size. To simply use of the Aqua-pH, plain English prompts and error messages are provided. There are no codes to interpret like some other brands.
One-touch Calibration
Calibration of the Aqua-pH could not be simpler. Just place the pH electrode into any of the pre-selected buffers and press the Calibrate key. Repeat for a second point and that's it !
The Aqua-pH displays probe condition after calibration.
All calibration information is stored in memory when the Aqua-pH is switched off, even if the battery is removed.
Low Battery Drain
The Aqua-pH will provide in excess of 100 hours of continuous use with an alkaline 9 volt battery.
A handy battery-saver function switches the Aqua-pH off after 5 minutes if no keys have been pressed. This function can also be disabled for continuous operation.
Temperature Compensation
Correct temperature compensation is vital for accurate pH measurements. The operator can choose to use the Automatic Temperature Compensation (ATC) probe supplied or enter a temperature value manually. Temperature compensation in both cases is performed by the microprocessor for optimum accuracy.
Australian Quality
The Aqua Series is proudly designed and manufactured in Australia. Our aim is to provide you with the best quality, service and value for money. The TPS Quality System has been certified in accordance with the AS/NZS ISO 9001 standard. Since 1968, TPS has built a reputation for excellent backup service that is second to none.
NOTE: 1m KIT INCLUDES
pH Sensor, 1m Surface only....121207
TemperatureSensor,1m..........121247
pH7.00 Buffer, 200mL..........121387
pH4.01 Buffer, 200mL..........121381
9V Alkaline Battery ..........130026
Manual........................130050
Genuine one-touch calibration puts an
end to time-consuming calibration procedures.
The Aqua-pH comes with all the accessories needed for immediate use. A hard carry case is also available.
Rugged and Reliable
TPS has used the latest microprocessor electronics to totally eliminate all internal and external adjustments. The result is a dramatic increase in reliability. The unit is ideal for field or factory use.
24 Character Alphanumeric Display
The two-line, 24 character display shows the pH or mV reading plus temperature simultaneously. Alternatively, a Large Digit mode is available. This shows one reading at a time at almost double the size. To simply use of the Aqua-pH, plain English prompts and error messages are provided. There are no codes to interpret like some other brands.
One-touch Calibration
Calibration of the Aqua-pH could not be simpler. Just place the pH electrode into any of the pre-selected buffers and press the Calibrate key. Repeat for a second point and that's it !
The Aqua-pH displays probe condition after calibration.
All calibration information is stored in memory when the Aqua-pH is switched off, even if the battery is removed.
Low Battery Drain
The Aqua-pH will provide in excess of 100 hours of continuous use with an alkaline 9 volt battery.
A handy battery-saver function switches the Aqua-pH off after 5 minutes if no keys have been pressed. This function can also be disabled for continuous operation.
Temperature Compensation
Correct temperature compensation is vital for accurate pH measurements. The operator can choose to use the Automatic Temperature Compensation (ATC) probe supplied or enter a temperature value manually. Temperature compensation in both cases is performed by the microprocessor for optimum accuracy.
Australian Quality
The Aqua Series is proudly designed and manufactured in Australia. Our aim is to provide you with the best quality, service and value for money. The TPS Quality System has been certified in accordance with the AS/NZS ISO 9001 standard. Since 1968, TPS has built a reputation for excellent backup service that is second to none.
NOTE: 1m KIT INCLUDES
pH Sensor, 1m Surface only....121207
TemperatureSensor,1m..........121247
pH7.00 Buffer, 200mL..........121387
pH4.01 Buffer, 200mL..........121381
9V Alkaline Battery ..........130026
Manual........................130050
| Product Group | No |
|---|---|
| Technical Information | pH Range : 0 to 14.00 pH Resolution : 0.01 pH Accuracy : +/-0.01pH mV Range : 0 to +/-1500 mV Resolution : 1 mV Accuracy : +/-1 mV Temperature Range : -10.0 to 120.0 OC Resolution : 0.1 OC Accuracy : +/-0.2 OC Input Impedance >3 x 1012 Ohms Asymmetry Range -1.00 to +1.00 pH Slope Range 85.0 to 105.0% Temperature Compensation 0 to 100 OC, automatic or manual. The Aqua-pH automatically detects whether or not the temperature sensor is connected. Automatic Buffer Recognition 4.01, 6.86, 7.00, 9.18 and 10.01 pH Enclosure Tough, ABS plastic case, waterproof to IP65 Display 24 Character alphanumeric LCD with full-text prompts and error messages. Battery Saver Function On : Automatically switches off after 5 minutes of no use. Off : Unit remains on for continuous use. Power 9V Alkaline battery for 100+ hours. Dimensions 157 x 78 x 35 mm Mass Instrument only : Approx 250g Full Kit : Approx 1.5kg Environment Temperature : 0 to 45 OC Humidity : 0 to 90% R.H. 121112/1 |
| Pack size | KIT |
pH
Range : 0 to 14.00 pH
Resolution : 0.01 pH
Accuracy : +/-0.01pH
mV
Range : 0 to +/-1500 mV
Resolution : 1 mV
Accuracy : +/-1 mV
Temperature
Range : -10.0 to 120.0 OC
Resolution : 0.1 OC
Accuracy : +/-0.2 OC
Input Impedance
>3 x 1012 Ohms
Asymmetry Range
-1.00 to +1.00 pH
Slope Range
85.0 to 105.0%
Temperature Compensation
0 to 100 OC, automatic or manual. The Aqua-pH automatically detects whether or not the temperature sensor is connected.
Automatic Buffer Recognition
4.01, 6.86, 7.00, 9.18 and 10.01 pH
Enclosure
Tough, ABS plastic case, waterproof
to IP65
Display
24 Character alphanumeric LCD with full-text prompts and error messages.
Battery Saver Function
On : Automatically switches
off after 5 minutes of
no use.
Off : Unit remains on for
continuous use.
Power
9V Alkaline battery for 100+
hours.
Dimensions
157 x 78 x 35 mm
Mass
Instrument only : Approx 250g
Full Kit : Approx 1.5kg
Environment
Temperature : 0 to 45 OC
Humidity : 0 to 90% R.H.
121112/1
Range : 0 to 14.00 pH
Resolution : 0.01 pH
Accuracy : +/-0.01pH
mV
Range : 0 to +/-1500 mV
Resolution : 1 mV
Accuracy : +/-1 mV
Temperature
Range : -10.0 to 120.0 OC
Resolution : 0.1 OC
Accuracy : +/-0.2 OC
Input Impedance
>3 x 1012 Ohms
Asymmetry Range
-1.00 to +1.00 pH
Slope Range
85.0 to 105.0%
Temperature Compensation
0 to 100 OC, automatic or manual. The Aqua-pH automatically detects whether or not the temperature sensor is connected.
Automatic Buffer Recognition
4.01, 6.86, 7.00, 9.18 and 10.01 pH
Enclosure
Tough, ABS plastic case, waterproof
to IP65
Display
24 Character alphanumeric LCD with full-text prompts and error messages.
Battery Saver Function
On : Automatically switches
off after 5 minutes of
no use.
Off : Unit remains on for
continuous use.
Power
9V Alkaline battery for 100+
hours.
Dimensions
157 x 78 x 35 mm
Mass
Instrument only : Approx 250g
Full Kit : Approx 1.5kg
Environment
Temperature : 0 to 45 OC
Humidity : 0 to 90% R.H.
121112/1