Product Categories
- Apparatus
- Chemicals
-
Equipment
- Autoclaves
- Balances
- Centrifuges
- Colony Counters
- Dispersers
- Dry Block Heaters
- Environmental Chambers
- Filtration
- Freezers
- Fume Cupboards
- Furnaces
- Grinders & Mills
- Specials
- Second Hand
Filtech Grade 363 is a very thick grade offering finer particle retention than Filtech Grade 333, along with high wet strength and loading capacity.
Grade 363 is recommended for the clarification of liquid suspensions loaded with fine particulates. It is also used in membrane pre-filtration and is also found in quantification of solids, and LSC (Liquid Scintillation Counting) techniques that require high loading capacity.
Product Data
| Grade: | 363 |
| Basis Weight: | 144 g/m² |
| Thickness: | 0.66 mm |
| Flow Rate: | 48 ml/min |
| Filtration Speed - Hertzberg: | 143 sec/100ml |
| Wet Burst Strength: | 460 mm H2O |
| Retention: | 1.00 µm |
| Loading Capacity: | Very High |
NOTE: Specifications given are typical values that fall within a defined range. For this reason observed values may vary slightly.
| Product Group | No |
|---|---|
| Technical Information | Product Data |
| Pack size | PK/25 |
Product Data
Grade: 363
Basis Weight: 144 g/m²
Thickness: 0.66 mm
Flow Rate: 48 ml/min
Filtration Speed - Hertzberg: 143 sec/100ml
Wet Burst Strength: 460 mm H2O
Retention: 1.00 µm
Loading Capacity: Very High
NOTE: Specifications given are typical values that fall within a defined range. For this reason observed values may vary slightly.
363-240