Product Categories
- Apparatus
- Chemicals
-
Equipment
- Autoclaves
- Balances
- Centrifuges
- Colony Counters
- Dispersers
- Dry Block Heaters
- Environmental Chambers
- Filtration
- Freezers
- Fume Cupboards
- Furnaces
- Grinders & Mills
- Specials
- Second Hand
The “Culatti” Micro Hammer Mill is unique
It combines the actions of two mills – a Hammer Mill and a Knife Mill. This is how it can perform equally well with both rock samples and fibrous, light and fleecy materials. Both kinds of material are ground to powder by the rotating hammers. The hard samples are pulverized by the pounding of the rotating hammers, and the fibrous products are reduced by the shearing action of the sharp serrations at the tips of the hammers and on the grinding chamber lining. Conventional hammer mills are not particularly suitable for paper and fibrous materials, while knife mills would quickly be blunted by rock-like samples.
First choice for every laboratory. If a laboratory hasn’t a mill of any kind, then the Micro Hammer Cutter Mill is the logical choice. It is capable of pulverising an extremely wide range of materials – almost anything from cotton and wool to rock samples. By investing in the Micro Hammer Cutter Mill, a laboratory can save money it would otherwise need to spend on purchasing several types of mills.
Applications of the Micro Hammer Cutter Mill:
The Micro Hammer Cutter Mill will pulverise anything that breaks, is dry and does not contain too much oil or fat, such as minerals, wood, grain, chemicals, bark, seeds, coal, twigs, drugs, cake, roots, dried and fat-free meat, soil samples, dry leaves, skin, artificial fertilizers, cork, bone, brittle plastics, paper, glands, cotton, cellophane, hair, wool, fabrics, seaweed, hair,synthetic fibres, sea shells.
Do not pulverise explosives.
Supplied with tubes, stand and 2 screens.
Product Group | No | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Technical Information |
|
|||||||||||||||||||||
Pack size | EACH |
Power source |
200 – 250 V AC |
90 – 125 V AC |
|
Power consumption |
200 W |
Power output |
100 W |
Maximum time |
15 min non-stop |
Operating temperature |
5 - 40°C |
Maximum humidity |
85% |
Maximum speed |
5000 rpm |
Dimensions |
L 290 mm |
W 150 mm |
|
H 280 mm |
|
Weight |
6 kg |